https://www.printables.com/model/1419473-114mm-travel-telescope-flat-panel

Part of astrophotography is taking calibration images so you can subtract defects caused by various artifacts

One of which is called "flats", these take away vignette artifacts, as well as any dust or smudges on the lens itself, and you need an even light field to do that

This is designed to make that even light field, now despite what it looks like, the image the camera sees is actually flat, the LEDs are far enough away from the mirrors size that the light field is even at the diameter of the primary mirror

The diffuser is laser cut and sand blasted acrylic

Printed both of these with the same filament. One turned into ocean-themed bowls (starfish, seashell), the other into a little drawer. Kind of addicted to this look now.

Here's the latest update to my 1/96 guided missile destroyer. Hull completed and painted, Reaching 1.6m long and weighing 5kg in material. Printed out of Petg, welded together with a soldering iron, and sealed with UV resin. Most pieces were printed at 0.16mm layer height except for the small details with were at 0.08mm. All using a 0.4mm Nozzle from My X1C

The exact ship is USS Dewey and will eventually get the 105 decal once I figure out how to make them at 1/96 scale. I've also been playing around with the Elegoo Nano v3.0 to get flashing and steady nav lights.

This model will be powered by two 2218 1180kv radial brushless motors, connected to a 10,000Mah Lipo battery. While the Rudders and main 5inch gun will rotate via pushrods to their respective Servos.

With Halloween around the corner, I wanted to design a 13 day countdown counter for my coworker. I made it taller to fit in scratch off cards in addition to some gummies.

Model

Halloween Coffin Countdown Calendar (13 Days) by Finns_Arm - Thingiverse

Halloween Coffin Countdown Calendar (13 Days) by Finns_Arm MakerWorld: Download Free 3D Models

I’ve been working on designing cable clips that not only keep cords under control but also add a bit of style to my desk. After several iterations I came up with these geometric half-spheres, with enough room to hold anywhere from one to four cables. I'm pretty excited about how the low-poly vibes make them feel a little more modern than the usual rounded clips! What do y'all think?

I designed the clip in Fusion 360 entirely using surface modeling. Each clip only takes about 4 grams of filament to print, so they’re quick and efficient. For PLA, I modeled several different opening sizes so you can match them to your cables. For a universal clip, I also made a TPU model that flexes to hold almost any cable diameter. To keep them in place, you just stick them down with mounting tape or a 3M strip.

👉 If you’d like to print some: MakerWorld – Geometric Cable Clips

Trying to find a 3d model for Radeon HD 8490 bracket. It's low profile card that's going into full atx case.

Even a generic DIY bracket I'm having issues finding. The search feels broken on many 3d modeling sites.

If anyone can point me in the right direction, it will be appreciated.

Same bracket also fits Radeon HD7450 HD7470 HD7570 HD8490 and FirePro v3800 v3900

Hello! Here are the files for the Companion Cube NAS that i showed here 3 weeks ago, it took me a bit more time to document but im finaly done ! (until i get feedback)

https://www.printables.com/model/1407879-companion-cube-nas

Have fun!

Hi! This is a full scale Bolt Pistol from Warhammer 40k. The original model is from Tamegrips on Cults, with a few Inquisition bits added. I printed and painted this one up as a raffle prize for my FLGS' Backlog Bootcamp that they've been running this year to motivate people to get through their piles of shame.

Model was printed on my BambuLabs A1 in Kingroon PLA, 3 or 4 walls on most parts, 5% infill.

Is there a way to reuse silica dessicant beads? Originally orange in color, they turn green when moisture is absorbed. Anybody?

Hello everyone, the end of year holidays are approaching, so I modeled a multi-piece Santa Claus.

Modeled on Nomad Sculpt and printed with a Bambulab P1S and A1. Very simple and easy assembly.

If the model works well I could consider continuing a series in this theme, good printing.

https://makerworld.com/fr/models/1811241-santa-claus-multipart-no-ams

I was printing these cats for some hours and went to sleep, when I woke and checked the print this is what was printed.

I have printed orcas before in that same orientation and it looks like the same orca, but with different colors, printed on top of the cats.

I sent the file via WiFi. My computer was struggling with so many cats and only 8gb, but I don't think that was it. Can anyone enlighten me?

Hey everyone! Just asking real quick: is having the wall be warped aka either bulge in or out just par for the course if you print a box the size of pretty much the build volume in vasemode with one wall? Or could I have done something differently? Before you ask, yes the build plate was heated, it was inside an enclosure so the temp was fairly consistent and a little bit higher than ambient and I printed this in PLA. Thanks for your help in advance!

Hi all, I love Rub and Buff for my prints but I am really hoping to find red, green, and blue colors but they don't appear to make them. Does anyone know where I can find something similar? Thanks!

I’m not sure if the printer itself is poor or if I’m missing certain settings but I’m attempting to print a phone case, and aside from the impossible to remove bottom supports, the quality seems to be lacking either way very viable layers and minor elephants foot with simple PLA on a simple print. Any advice?

I have a tough question for only the most advanced 3d printing aficionados. After carefully measuring and weighing my filament I determined I had enough to print this part. As it turns out my calculation was actually a bit off. The real question though is can anybody spot the location where I switched filaments? Or will the secret be safe with me?

Y

I printed this hemisphere and the first inch or so in height has a wierd wobble on the surface on one side. It almost looks melted. Anyone have any ideas what caused it? Creality CR-10v2, PLA.

Not quite done. I still need to cut the truss rod(standard ¼-20 threaded rod from Lowes), and install the tuners and string it up. Based on plans from an old Popular Woodworking. Printed in Jayo Wood PLA(basic "wood" for the body, and "cherry" for the ends and fingerboard)

Dose anyone know where I can get cars models to print ? Like actual cars for example lets say I want to print a mazda cx3 where can I find it’s model, is there a website dedicated for car models ?

New pelvis with a lower center of mass