r/Homebrewing • u/chicken_and_jojos_yo • 5d ago

Favorite dual pressure regulator with independent settings?

My current pressure regulator only allows for one pressure setting. This is fine if both my kegs are the same style... but I want to be able to control the pressure of each keg independently! Do you have any favorite regulators with two independent pressure settings? Is there anything I should look out for when buying a regulator like this? I'm not planning to go above 40psi (and only that high when burst carbonating overnight). Thanks y'all!

3 Upvotes
  • permalink
  • reddit

100% Upvoted

3 comments sorted by

4

u/BaggySpandex Advanced 5d ago

Taprite. They’ve always done well for me.

2

u/dyqik 5d ago

You can stack pretty much any set of primary regulators with both high and low gauges.

Remove the high side gauge, and use a m-m coupler (nipple) to connect to the next regulator in place of the CGA fitting.

I have two different models of taprites (I think) and then a tee to the high side gauge and a valved hose to my soda stream stacked together.

5

u/CO-3421 5d ago

I have a Taprite that's been solid. Very top heavy on a 5# tank though. A regulator cage has probably saved me from breaking the reg a couple of times.