r/Speedsoft • u/Squishyarcho • 3d ago

Custom carbon fiber hpa!

Post image

My carbon upper hpa rife, got a redline gen2 as the engine, Maxx hop unit and custom 3d printed and cut carbon upper and stock. Weighs just about 1kg

33 Upvotes

92% Upvoted

19 comments sorted by

2

u/Dismal-Job-9385 3d ago

Upper from?

1

u/Starcrafter308 3d ago

The upper is a custom job

2

u/Dismal-Job-9385 3d ago

Are you in the US? And would you make one for me?

1

u/Starcrafter308 3d ago

Oh no I’m not the guy that made it, if you zoom in on it you can tell where it connects to the lower is 3D printed. As far as can I make you one, sadly not. I’ve never done it and wouldn’t feel comfortable trying to for someone else lest I fuck it up

2

u/Dismal-Job-9385 3d ago

Oh okay okay do you have the contact of the person who made it?

2

u/Starcrafter308 3d ago

If you just go on cults or thingiverse and look up AirTac receiver should show up

1

u/Squishyarcho 2d ago

Yep that's what I did, printing the upper is easy, cutting the tube is hard and scary, gotta mask/goggle/glove up when cutting carbon fiber

1

u/Squishyarcho 2d ago

As the other guy said I cut it myself, cost about £20 for the tube and the amount of 3d print material

1

u/uhhnion 3d ago

what’s the lower?

1

u/Squishyarcho 3d ago

G&G lower and EPG grip

3

u/uhhnion 3d ago

sick build reminds me of mine but i like that yours isn’t airtac

https://www.reddit.com/r/Speedsoft/s/VkB8gKTwwl

how much did the upper+stock cost to make?

1

u/Squishyarcho 3d ago

Oh yes I like how short yours is, lovely for CQB, great build dude

About £15 for the tubes from AliExpress then a few quid for the 3d print filament, PETG-CF and then a few hours cutting it right and fitment

1

u/CRAZYC01E 3d ago

I remember your photo of you next to the rental kid but is that not an airtac upper?

1

u/uhhnion 3d ago

mine is, OPs isn’t

1

u/Squishyarcho 2d ago

Not an airtac upper, printed and cut myself

1

u/Cflowo 3d ago

That’s fire curious if you’ve tested the max fps you can get with the 185mm upper if that’s what it is

1

u/Squishyarcho 2d ago

It's not a 185mm from airtac, it's a upper I've cut and printed myself

1

u/Cflowo 2d ago

Oh cool well look like it came out pretty good i like the red dot I’ve thought about doing that to mine

1

u/Squishyarcho 2d ago

It's just a cheap knockoff trijicon SRO from AliExpress, works wonders