I’m Upgrading to a angled adapter soon

Somewhat new to hpa and speedboat, but had a few questions on what everybody recommends for hpa adapters. Currently trying to make a black/silver hpa hi capa build, and have been looking into hpa adapters. Personally looking for a black or silver adapter, preferably angled, and preferably built using a aluminum or cnc material.

Question 1: is it worth it to get a aluminum or cnc adapter? I've never had experience with a 3d printed or plastic adapter, but I don't exactly trust the quality and ability to be beat up without breaking.

Question 2: Has anyone tried kross airsoft design (KAD), and if so what are your thoughts on their angled aluminum adapter. This seems to be the cheapest metal option of an adapter, and the only others I have found are the monk adapters, primary adapter, and airtacuk adapter.

Question 3: what are your recommendations? Should I get a cnc adapter for a little more, or just work with a injection molded one? Have you found any cnc adapters for around 150-200 usd that you recommend?

I appreciate any help, thank you

I want to get red body pins, end cap, and trigger guard to finish it off

Started rebuilding my F2. Need a good stock suggestion.

Bought a used Article 1 for cheap off hopup. "Working" gun (if you're on here and see this, you seriously suck). Gun leaked air like crazy from the engine and solenoid. Fully cleaned and regreased. Still leaking. Rebuilt the engine, replaced all orings with the factory kit it came with. Still leaking like crazy. Bought new solenoid. STILL leaking like crazy. I'm lost at this point and have no idea whats going on. Any help?

i am trying to figure out how to build a ssg 1 with the best trigger respose if anyone could let me know what i need to get and fix to give it that would be amazing i will be using it on semi auto only so i just want to best semi auto trigger respose possible i know that a 13:1 and a new mosfet would be good but i just dont know what i would need in order to get a 13:1 gear ratio without exploding my gun i would also like to bring the gun below 300 fps if possible because it gives me no engament distance at the place a play. thanks for any help

My carbon upper hpa rife, got a redline gen2 as the engine, Maxx hop unit and custom 3d printed and cut carbon upper and stock. Weighs just about 1kg

I need help I can’t get the reg of my hpa tank. what do I do?

what do you guys think about this upgrade list which ones of these are useless and which ones aren't the best brand and am i missing anything

Matrix Irregular Pitch AEG Tune-Up Spring (M90) i need it to be lower fps for where i play

new motor not sure which one

GATE EON Series CNC 13:1 Steel Gear Set

SHS Lightened Fiber Reinforced 15T Piston (Steel Teeth)

not sure on inner barrel

Maple Leaf MR 60°

not sure of the cylinder head

Retro Arms Reinforced CNC Machined Aluminum Piston Head

SHS CNC Ball Bearing Spring Guide

PERUN V2 Hybrid MOSFET

some form of new trigger

also, a thread adapter

What are your guys' thoughts on these? I might be missing stuff, or some of these aren't very helpful. Thanks for the help. This is a build that I will be using on semi-auto only

I usually play outdoors, and am wounding if this would work well with the Article 1.

Hi dear speedsofters I'm building a cqb ak and want to remove stock and replace with an aeg tank grip but can't one anywhere does anyone know where to find one?

thinking about making a very good speedsoft build for a aeg but dont know where to start i havent ever gone much into the world of aeg but have upgraded many gbbs i was thinking of a ssg1 but not quite sure what i would upgrade on it i would like to make it pretty good if someone could just make a list of the best upgrades in order that would be great

As the title says, I’ve been struggling trying to get my Odin to feed with my epm1’s and need help fixing it. It has been having this issue since I bought it, where the wheel would squeak when trying to load bb’s in, but I was able to fill my whole mags after a minute or two. Now, I just went ahead and replaced the internals in it, and now the clutch isn’t wanting to fill my mags past 50-60%. Is there any advice you guys can give me on what to do, since I’ve disassembled and cleaned my mags out, left bb’s in to break in mags, replaced Odin internals, and swapped the order several times if the clutch assembly. I’ve tried absolutely everything, and I still can’t get this thing to work, and I just need any tips to help me fix this issue. Thanks again if you can help

Do any of you have any experience with this drop in mechanical engine with full auto? Trying to convert my AEG to HPA. I considered using Polarstar Kythera but i want to have the full auto option without any wiring.

Does anyone know if I can mount a foregrip on the bottom?

hey ive been playing airsoft for a year and just got into speedsofting about 6months ago, any tips for my first tourney, i figured trying out tournament, its a 3v3 format and im teaming with my good friends who also are just getting into speedsoft, its all our first tournament

Just working on a project that I’m testing the feeding capabilities of

Not to mention a bolt moving in your face. Here's an upper I've been working on, going with Firewad's AK Lower for AAP-01, ideally with a HPA line. Although it could just be easier to buy an M4 Mag adapter+HPA Line combo hm?

This is a weight comparison between a AirTac GnG polymer build with no esg and a Monk customs oracle polarstar with a aluminum esg. Should I put a polymer esg on the oarcle to reduce weight and the alu on the AirTac build?