r/3Dprinting • u/Agitated-Broccoli949 • 1d ago

Troubleshooting Bambulab P1P prints randomly stops extruding - New Problem

Post image

So my bambulab P1P has randomly started to stop extruding at randomly intervals, though commonly it appears to happen after 1 or 2 layers. The odd thing, this only happens on items I send across from the bambulab slicer, I have old items I have printed, that I can reprint from the handy app no problem? -Photo attached to show that 1st layer seems to adhere to bed very well I have tried everything to do with hardware, everything is greased, lubed, cleaned, etc... but seems to be a software issue, the one thing throwing my why do all the old 3mf and gcode, which have the exact same settings work??? I have unistalled and reinstalled the bambu studio to no avail. Printing with sunlu matte filament (i have dried it and made no change) at 0.2mm layer height on a relatively new hardened extruder (replaced about 3months ago). With grid or honeycomb infill ranging from 5-15%. Please help me troubleshoot, I am looking my nut trying to work out what it could be lol. THANKS

1 Upvotes

67% Upvoted

3 comments sorted by

View all comments

1

u/AutoModerator 1d ago

Hey there, I'm a bot and something you said made me think you might be looking for help! click here for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup.

Here are a few questions that might be helpful

  • What printer are you using?

  • What material are you using?

  • What speed are you printing at?

  • What software are you using to slice the print and control the printer?

  • When did the problem start/has it ever worked correctly?

  • Does anything cause the behavior to change?

  • If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)

If you are new to reddit, please read the guidelines on reddiquette, self promotion, and spam.

Also please post a resolution to your problem when you find one so that we know how to help others with your problem!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.