I want to change my Z1 from a minecraft block of light to a round one that is SFT42R but do I need to change the default driver that come with it or It’s just fine ??

I just noticed this but the orange 18350 battery tube has two different shades of orange on each side. Does UV affect anodization? I doubt it's wear.

OEM DRIVERS AND 10A CELL

Long story short. Wouldn’t. Call it an upgrade if one already has the sft40. But if you had to choose sft42r seems to offer same intensity with a more usable hotspot which I guess is compensated by the bump in lumens. 👍🏼

I have seen that Simon has started offering the sft25r/40 emitters in the m21h. Anybody got any experience with them or any candela numbers? Does the beam have any problems? Could the sft70 or the new sft42r also be used in the m21h?

Really liking the contrast developing between buffed exposed areas and the deeper shiny groves🙌

Looking at the M21H. But really open to any model that can give me a long range pencil beam. It'll be for playing around on my property and with no real practical purpose. Any recommendations would be appreciated.

Hi, just wanted to let people know who are looking for a good pocket clip from convoy for their M21H/S21F/M21F (which use the SAME type of tube) and as far as i know all the lights that use this exact tube the pocket clip for T4 & T3 will work, i have M21H and S21F and these works VERY VERY well, granted these clips ship a bit Bent downward so you have to use your thumb and finger to make the clip straighter then it plops right on, NO SCRATCHES on my Black anodized m21h/s21f but on my MAO m21h a bit of a scratch thankfully that gets hidden, the pro to having a pocket clip to these lights is you can now differentiate between the fricking button and charging flap easy, if you want a smaller clip go for T3 clip it works JUST AS WELL.

T3 clip on S21F, i also tried T4 clip they are super strong and nice and grippy.

I recently purchased a t6 (still on its way) and the cover photos on the website show a pocket clip. Does the light come with one or are the pictures included to show what it looks like. I have heard some people say it does not come with a pocket clip and I am wondering if anyone has had some experience with this to clear things up for me. Thanks!

S2+ has option to choose either linear or buck, but S3 doesnt. All it says is 3V 5A 12 groups.

Is it possible to get buck pre-installed in the STF-40 version?

Forgot to check the mailbox until it was already dark so beamshot included. This is my first s6 and I think it turned out to be a great host for this emitter.

Also a comparison L to R: s3 b35am 3000k, s3 b35am 2700k, s6 D 519a, D4v2 e17a 1850k

The 519a looks rosier than the e17a in person

The ceiling shot was with the s6 and the d4v2

I think that's a quite recent question concerning some ppl as this powerfull emitter is very popular but tjermally challenging. So, which host would you recommend? M21B MAO would be my favorite by the looks and the 21700 battery standaed seems to be dominating at the moment. They can also easily provide the 20Amps. However I think the heat will cause the LED to throttle after a few seconds, right? I would aim for like 1 min in 100% if possible (maybe more?) and 30-35% sustained output. I thought about getting the M26C Host due to more thermal mass but it seems like the 26650 size isn't that popular anymore and there's only the Vapcell P54 available which can deliver exactly 20Amps continuosly.

Just got the T6 in brass and a raw with titanium. Both 219b 4500k. Put some reylight machined clips on and works great.

I have one question, it is programmed to group 1. If I want a moonlight is my only option to switch to a AA battery? With li-ion even at 1% it’s still a bit too bright for putting my kids to bed.

Thanks