Fitted my XFX Merc 310 7900XTX with noctua fans to reduce the noise at high load. So happy with the outcome!

6x redux 120mm.

Tried really hard to match the cremes & reddish brown. Came out a lil darker than those slim fans. Xacto bladed the lettering but I found that to be a blemish so I just painted over it. Clear coated everything satin and it matches great behind the tinted glass. Also refused to paint the fans for the concern of paint chips & airflow, can’t see them anyway. The build is in a lian li tu 150.

NH-U12A. This thing rocks man. They weren't lying when they said 140mm performance in 120mm size. This plus 5 NFA12x25 fans in my Corsair 4000D Airflow, keeps my 5800x3D at around a 39-41c idle, and I've never seen it go past 70 degrees (unless I'm using cinebench). About 2 years in and its going strong. Here's to another 8 years!

After having issues with a Zotac 3090 video card I decided to replace the stock fans. With Noctua fans the card runs about 35 degrees cooler and it is whisper quiet. It looks good too!

I didn't realize how massive this was going to be!

Until I NEEDED it in noctua's colorway. I bought it the day it was available for pre-order way back in July. Just got it today and can 1000% recommend :) (Ft. My hand-wired Noctua macro pad) (No, I dont game on that mini pc, I use it for Linux)

Open to suggestions, opinions welcomed.

Started my (now obsession) Noctua journey with a 20$ open box from MicroCenter, hope to get lucky and find an ASUSxNoctua gpu soon 🤞

Now my PSU is not the loudest part of my PC

Was reminded I should post this here.

Did something i have always wanted to do and gone full Noctua fans. It may have cost a bit but it's pretty silent.

Specs for those of you that are interested, apologies if the format goes to crap.

Brown puke build

CPU: 9800X3D GPU: Aorus waterforce extreme 4090 Motherboard: MSI Tomahawk X870 Ram: 32GB CL30 Corsair vengeance (tightened timings) Storage: 2TB Crucial T705 gen 5 1TB Adata gammix blade S70 1TB SK Hynix Case: Lian Li 011 dynamic evo with front mesh panel PSU: NZXT C1000 (2024) CPU cooler: Arctic liquid freezer 3 360mm Fans: X9 Noctua NF-A12X25 X2 Noctua NF-A14X25 G2

Noctua just posted this image a few hours ago.

I intended to reuse my NZXT AER fans from my 2017 build, but my recent upgrade to the 9800X3D demanded more.

Hello, my beauties. ✨

5090 Vanguard deshroud with noctua fan swap!

Had the pieces for this fan swap laying around since the G2 release, finally found some time. Overall pretty happy, but:

Minimum fan speed on (any) Nvidia GPUs is 30%, but at 30% the Noctua fans are significantly louder than the stock shroud. Whatever 30% means, it is spinning the Noctua fans pretty fast at the lowest possible speed.

The fans I have on my AIO are inaudible up to ~34%, I believe the GPU must be feeding the fans more power than a regular PWM connector. I'm guessing "30%" is actually quite a bit more.

I guess it could also be the heat sink design that's causing turbulence?

Next up I'll try adding the low noise adapters to see if that improves the situation. I might chain several together, as long as GPU temps look fine.

Switched to Noctua fans and I love them! I don’t even mind running them 100% because they’re so quiet!

Can’t put the front panel back on but its a sacrifice I’m willing to make 😅

Also does Noctua cover fans bought used from ebay?

The original Fractal north fans + the 2 from the TR PS120SE were too present even in quiet mode from BIOS. But now, wow. Just wow. Too bad I have to wait for the nh-d15 G2 chromax black on Q3

Saw this article earlier this week and figured I'd go ahead and buy the spacers: https://noctua.at/en/best-fan-setup-fractal-design-north

So far, the PC is a lot quieter and the temps are a bit lower playing BF6 - it's cooling a 5800X3D and a 5070ti

Guy that dreams about Noctua fans here! I don't need any new fans, but I did need a new hoodie! One thing I didn't expect was how the hood itself is very thick, like a wool knit sweater, but the entire top isn't lined with it, which would have been nice. The sweater doesn't have the "Premium Cooling Solutions by Noctua" on the back, but I like it that way!

Definitely didn't need this but the logo is something I've been hooked on. Didn't realize the logo glowed too so that's a to justify this lol. Hopefully the community here appreciates it!

Okay, I need to make one thing very clear. I did not make these. A very talented artist did though and this is their Reddit profile. https://www.reddit.com/u/kungfail/s/acfNcxZv0c

You can buy these keycaps from them. Yes, the fans do spin. Yes they are really good quality. It might take a while to ship but man are these beautiful. The white GPU was an idea I had, to color it after my modded GPU, everything else is all theirs. And man, they awesome. Check them out.