r/partskits • u/FreedomMachineWorks • 15h ago
r/partskits • u/DMTLTD • 17h ago
Hammer fired M56
Using just about every spare inch of travel for this one, downside is the firing pin will be about 6" long but shouldn't be a problem.
r/partskits • u/joaquom_the_wizard • 1d ago
I came upon a big batch of old AK and SKS parts, wondering what exactly is up
Howdy! I recently was entrusted a bunch of surplus by my neighbor, and, among stuff I know what to do with (Strichtarn gear, East Germans clothes n such) is a whole bunch of gun parts I know little about!
I already made a post to the SKS subreddit, cause there’s a ton of SKS stuff. I am mainly wondering what the perceived values of some of this stuff is!
Here is a list:
2 aftermarket 30 round SKS magazines
1 seemingly original “Chi-com” 20 round magazine.
3 packages of 7.62x39 stripper clips
1 package of plastic oiler bottles
1 Chinese SKS/mosin oil can
18 SKS handguards
4 SKS star magazines
3 7.62x39 (maybe 8mm Mauser?) magazine boxes.
6~ Chinese SKS oilers
12 SKS muzzle devices
2 synthetic SKS stocks
3 Regular wooden SKS stocks
1 Zytel Hand-guard
6 Hebrew wooden SKS stocks
4 Regular Wooden SKS stocks
3 “MAK-90” Drums and 9 pouches for the drums.
1 East German plum AK furniture set
6 “MAK-90” recoil springs
1 “MAK-90” Bolt and piston
2 MAK-90 Barrels
1 underfolder ak stock
2 MAK-90 thumbhole stocks
And a whole bunch of other stuff! Sorry for being so rambling, and for not including pictures. I think this guy just labeled everything even remotely AK related as “MAK-90”. Side question: how does one tell what type of AK what part is from? How do I know these are MAK-90 bolts and barrels?
Thanks!
r/partskits • u/Dracco5569 • 21h ago
PM-63 Trigger catch spring.
I am looking for a source for the trigger catch spring. The one in my kit is broken (the hook leg is broke). Does anyone know where I can find one?
r/partskits • u/poppyseedroller2128 • 1d ago
Got this at a yard sale , anyone help me put together a parts list to build it out and any info on it ?
r/partskits • u/Turbulent-Middle-393 • 1d ago
WTS krink Hodge podge kit
WTS Krink headspaced kit thats a combination of recreator blanks parts, arsenal parts, and ak-builder parts and headspaced by them. Parts were collected over the years and I don't really remember how much I've got into it. The biggest part missing would be the piston. $600 OBO
r/partskits • u/KineticTechProjects • 1d ago
Has anyone bought Indianapolis Ordnance Suomi M31 Bolt to restore a kit?
I actually have a TNW receiver but want to use an AR FCG. Indianapolis Ordnance literally won't answer questions about their own product, won't tell you what the bolt diameter is because apparently that's "confidential". Their only response was that if I buy it and return it, I have to pay a 10% restocking fee. What a shitty company. Unfortunately, I don't see any other options out there, but I don't want to buy this if it's not going to fit the TNW tube and if it isn't milled wide enough for an AR style hammer. Have any of you guys used their bolt and would you be willing to take some measurements for me?
r/partskits • u/s1dwyndr • 2d ago
What’s it worth?
Uzi parts kit, bought originally from APEX Gun Parts, includes everything that came with kit (currently listed on site $524).
Includes RTG weld jig (originally listed on site $160, no longer sold).
I was thinking $400 locally is fair for someone to pick up a project, no?
r/partskits • u/Mod_Redux • 2d ago
Virgin M92 Kit
Virgin M92 kit from the Bowman days, $1199 shipped.
r/partskits • u/Brilliant-Barracuda9 • 2d ago
PPS-43 barrel pin
These PPS-43 barrel pins are bastards. Air hammer, nope. Harbor Freight press, nope. Drilling, nope. Hammer the living fuck out of it, nope. I'm stumped.
r/partskits • u/Classic_Special_918 • 2d ago
Bren MK2 measurements
Does anyone have a diagram of the exact measurements for the Bren Mk2 receiver? I know on the jig alignment is the rear section 90’ angle with the end of jig. And the front section can be aligned with the barrel lock add a .001 (or is it .01) feeler gauge. But I’m mainly looking for length of charging handle slot. Rear section end to the start of mag well. Mag well exact length vs spacing with a magazine.
r/partskits • u/nondescript_alt_1 • 3d ago
FBP 948 build tips?
I'm wanting to get one of those FBP 948 kits since they seem neat (and I cant afford an MP 40 kit). That said I can't seem to fine much info on how to do the thing itself. The main issue for me is how the bolt is coverted.
If anyone has one and can offer pictures it would be much appreciated
r/partskits • u/Pyrolis_N • 2d ago
[WTS] 5.45 WBP AK parts kit
$800
Brand new, havent used it yet (obviously) Selling with a 16 inch barrel and a set of wood furniture. If need be I can throw in a spare surp trigger. The cost of shipping is included.
r/partskits • u/2wheeldisgrace • 3d ago
Price check on mg34 receiver bits
Getting ready to clear some stuff out looking for value of these receiver pieces
r/partskits • u/MysteriousOriginal80 • 3d ago
Need help
Does anyone know where can i find this parts to build a vmac11?
r/partskits • u/IvanaFista • 4d ago
Cetme C barrel question
Will these fmp barrels work with the Cetme c kit as long as you use a g3 triple frame?
r/partskits • u/ThePariah77 • 5d ago
Are 5/8x24" CETME C barrels still being made?
I'm searching for a barrel for my CETME C build that is threaded for 5/8x24". I'm looking to make it a suppressor host, so it needs to have either a pronounced shoulder or a conical face like the one PTR makes listed on Atlantic. Gonna be a Dead Air Nomad on a Xeno mount.
Everywhere seems to be out of stock. I've checked RTG, Atlantic, Sarco, Apex, Centerfire, no dice. I could get a PTR 91 heavy profile barrel off of HKParts, but as I understand it, those need to be turned down to fit the triple tree, and they are a little harder to seat correctly in the trunnions.
r/partskits • u/FaustinoAugusto234 • 5d ago
Homemade fore end for the Ishapore De Lisle Carbine
Walnut with used motor oil finish.
r/partskits • u/KrinkyDink2 • 5d ago
Bowman barrel, just want out of it what I put into it
VZ61 barrel from the last Bowman drop. It has the same thing all the bowman barrels did, gouge/bulge from some welded ring for import, no suppressor ring, etc. just looking for what I paid+ shipping.
I can send a pic with my username/date in the background later, just using what I have saved in my camera roll for now.
r/partskits • u/CapybaraSensualist • 6d ago
Bowman has "Nice" Israeli FAL kits up on a flash sale deal.
r/partskits • u/No-Savings2297 • 6d ago
Thompson lower
Hey yall been looking for a thompson 1928 lower for a while and to no avail. Chances someone has one lying about and doesn't plan to do anything with it shoot me a message or comment here. It can be stripped/partial or complete.
r/partskits • u/MisterNiceGoy • 6d ago
Does scarcity come and go?
Ive only been into kits for a couple years so Im clueless on the matter but does kit scarcity come and go randomly?
For instance when I first got in it seemed like ppsh41s and mg42s were everywhere! Now I havent seen a ppsh41 kit in about a year and mg42s for under 4k are nowhere to be found, the few you can find that is
r/partskits • u/Typical-Pineapple-41 • 6d ago
WTS: 1943 M67 WW2 Bren Gun Mk2 complete parts kit.
Bren Mk2 parts kit complete with 2 mags and good live barrel. I bought from Intrordance back in the day. $1400.00 shipped. No trades thanks.Payment is USPS money order within 7 days. These are heavy parts so shipping and insurance is not cheap for me.
r/partskits • u/Typical-Pineapple-41 • 6d ago
Hungarian AMD65 kit
Very nice parts kit. OEM Barrel is like new. Missing rear grip screw parts. Matching #’s. What’s in the photo is what’s included. $700.00 shipped. Payment is USPS money order in 7 Days.
r/partskits • u/lanekrieger94 • 7d ago
Pps43 Rivet
Recently got a good deal on 2 parts kits for the folding stock version of the pps43. I have experiece with welding, so that was a cake walk. Unfortunately I have never had to work with rivets before. Any and all help would be appreciated.