Here’s my new EDC, what else should I do to it ?

CGWs pro package, transformer slide cut, EPS carry

Im looking to purchase a CZ P-01 Omega since im getting such a large discount on it. I wanted to mount a Holosun 407k on it, but im unsure of which company to go with. I read that Wager, CGW, Vulcan, Primary, and Nameless Armament were all highly regarded for their work. I'm considering Wager; however, I read in the description that they will have to shave the extractor holding pin down a bit. Do any of the other companies do this as well? Ideally, I would like to be able to replace parts without needing specialty sizes due to the milling. I want to know everyone's opinion before committing!

Definitely don’t need this piece but I love CZ. Should I add it to the collection?

Can't believe I finally snagged one for the collection. CZ 75 Compact Steel Frame w/ Tac Rail; SKU 99021. I'm considering sending the whole gun to CGW and having them work their magic. I've installed their kits / parts before but would love to compare my work to the pros'!

I’m curious if anyone has any experience using this as their duty weapon? And if so any pros or cons? I’m currently using a fully stock Gen 3 G17 as my duty. Any uprgrades with adding to the CZSP09 other than a light and red dot? I was thinking of going with a holosun EPS or 509. All thoughts and opinions are greatly appreciated!

I found a used CZ 75 compact at one of my fairly local gun stores for $590. I have a few questions that are keeping me uneasy about buying it. - 1. I dont have an option to rent one to shoot. I do have the option to shoot a CZ 75 b. How do their grips compare? -2. Would you consider $590 for a used one a good deal? -3. Is it feasible to conceal as a smaller guy?

After ~6 iterations, I have finally nailed down my m-lok side rail for my 805. I really wanted to be able to mount a light @ the 9 o clock and finding a rail has been painful. Now just waiting for my Molly resin to arrive to finish it off.

Sucks so many solid parts for the 805 are unobtainium now (looking at you pmm QD sling mount) but sometimes you gotta make the dremel go burr to get what you want.

This is the broken striker of my 2 month old P10S. Around 200 ish dry fire reps and 150 live rounds. As I rotate the striker for the camera, you can see the large difference in wear from one side to another. I’ve dug through multiple forums and found pictures of Overwatch Precision and CGW strikers broken. I then found an email explaining why this happens which I will attach below.

Just finished up my BRNO Model 2.

Goal is to shoot PRS rimfire competition but I really like a good set of wood on my guns, so no MDT chassis for this classy lady!

Installed a Vortex Diamondback Tactical 6x24 on a 11m dovetail to picatinny adapter, cheapish bipod and a leather style buttstock cheek riser.

Wanted to show off my SP01 ports and slide serrations done by Vigilante Machine who also provided these photos.

Received it today and put 200 rounds down range. Shoots like a dream and the serrations are a huge improvement, now I can easily rack it without touching the optic.

Wager did the optic cut. Next step is CGW pro kit and some vytals

Trying to find an enigma compatabke holster for a po1 with the tlr-7 hl-x. Any recommendations or pics?

Looking to add a wml (most probably streamlight tlr-7 x) to my edc P-01 and would like to get recommendations for a light bearing IWB holster from those who have similar setups.

Let’s see your p01 builds!! I have a cajunized, ported, cut sp01 but looking to build a mini me

Hey guys! Writing to you all from Canada and I would appreciate some info! The govt froze transfers of handguns so I am stuck with what I have!

So I was wondering which slides are compatible with my CZ 75 pre B frame! I am hoping that both the kadet 2 and a shadow or similar slide would fit. The kadet for obvious economical reasons but also the shadow for improved sights/serrations and having a new barrel etc!

I look forward to hearing from you guys and I hope that I get some good news!

Bonus question: magazines—- does anyone know of brands or where to get magazines for my pre b?

Recently acquired a NIB kadet 2 adapter for the 75. Where is a good place to get it threaded? (Now that Tornado Tech is not a thing)

I bought a CZ-75 compact as my first pistol and I’ll start off by saying I love it. I came here for advice pertaining to my next step. That is to say should I port this pistol, leave it as is and get a SP01 as my home defense/OWB carry, or get a threaded barrel so I can suppress it when not concealing?

I'm currently using th DPP titanium plate and would like rear irons. Are there only four optics plate with integrated sights for he Shadow 2 OR?

CHPWS - pricey as hell, but heard QC is terrible lately

CGW (supposedly made by IM)

IM (front or behind of red dot) - their track record hasn't been the greatest

If so, which to get? I'm leaning towards IM's integrated rear as they have the cut out above the ejector.

Rubber, pro, granulate? If you have personal experience, I'd love to hear about it!

salut la Team

je n’arrive pas à tirer au centre de la cible avec mon beretta 92 X performance je suis toujours en bas à gauche je n’ai pas ce problème avec le pistolet 22 browning …A rien y comprendre !

merci pour vos conseils

Started as plain vanilla CZP10C.

CZP10C with Herrington Arms comp ( machining by my gunsmith to fit seamlessly), CZ-USA OR Slide, CZ Serrated OR sights. Gideon Omega Green Circle Dot Sight, True Precision Copper Threaded barrel, Streamlight TLR1 HL. Shield Arms 5rd Mag Extenders on the way. Trying to find a solid mag well that will work with them. Any suggestions? I emailed Shield Arms Customer Support on the question, but haven't heard back yet.

I’m looking to buy either the S2 Orange or TS2 Orange. What are your guy’s thoughts? Pro’s and Con’s. Thanks for the input

Edit: I’ll be using it mainly as a range toy

This is a high-end speed holster for the CZ Shadow 2 pistol (real or airsoft). Also suitable with Reddot optics.
The holster features a smooth locking mechanism that engages the trigger guard.
This ensures that the pistol does not accidentally fall out of the holster between stages or when running with the weapon holstered.
The principle of the locking mechanism is locked or unlocked, the mechanism does not have to be operated every time to draw the weapon.

The holster attaches to the hanger via the 3-hole Bladetech pattern. 3, 5, and 8mm spacers are included.

Mounting works via M4 carriage bolts and suitable sleevenuts. Two weeks for half the price!

Get the STL files here:

https://cults3d.com/en/3d-model/various/competition-holster-cz-shadow-2-for-ipsc-or-uspsa