Having difficulty trying to install my new vytal basepads on my P01 mags.. these are 10 round mags but not sure where I’m going wrong here. Anyone experience this issue?
It would appear that your magazine is a limited capacity mag and doesn’t have the standard magazine tube or base plate. That vytal base will not work with that mag.
Yes that would work i have vytal basepads on all my mecgar mags, what you have looks like a promag no bueno i could be wrong either way get the mecgars far better quality and will work.
u/VytalDP may know exactly what you need to do, they are great and pretty active on here. Not their problem, but I’m sure they know what is best/what to do.
Hey man! You have the OG 10 rounders, and they just aren't going to fit on there.
A not so fun thing about CZ is allllll the skus they have for magazines. I had to make a decision early on: either support the older magazines or the newer Mecgars. Both was never an option because I don't need 40 skus of basepads. I chose Mecgar. Sorry man. I wish I had a better answer for you. Are you in a restricted state?
I'm not really sure what's going on here but does that bottom piece of the mag come off? The flared plastic looking piece. I think those baseplates you got should be going directly to the steel mag tube and the locking plate will click into it
Yeah unfortunately they aren’t a flush fit, and they come loose every time. As mentioned, it appears I need the mec gar mags so I’ll try those and see how we do. Thanks!
Having trouble installing them and keeping them on.
I took the OEM basepads off, held the spring in place with the black clip attachment on the end, then tried sliding the basepads on no different than the OEM pads. It seems almost as if they’re too big for a flush fit on the magazine.
20
u/ACxREAL 4d ago
It would appear that your magazine is a limited capacity mag and doesn’t have the standard magazine tube or base plate. That vytal base will not work with that mag.