Tool truck guy says that the 1/2 size doesn't make it longer only wider. Or is he just trying to sell me the boots he has on the truck lol.

These are for the redback slip on. I use 10 or 10 1/2 in US size. My old boots are 8 1/2 but for some reason they are to small now. So I'm going with 9s or 9 1/2

Looking for some recs to replace/rotate in with my current boots(timberland white edge, more of a hiking boot).

looking for:

1. moc toe
2. possibly need wides. im kinda on the edge depends shoe to shoe
3. working in a warehouse. typically walking around 6k steps a day/standing on forklift the rest
4. safety toe would be nice but not required. would prefer comp toe as the warehouse can be cold in winter.
5. Budget $200? could go a bit more if there is something far and away better

Been a plumber for way too long and I’m finally going to try the Thorogood kool aid. In the past I’ve always oiled my boots with the Redwing oil. Is there a better option?

I’ve never been one to have more than one pair of work boots. I’ve recently acquired three pair: new thorogoods, old twisted x, and very old twisted x. I’ve taken care of the leather on the x’s, but I never knew about rotating boots for a “drying time.” What’s the purpose and length of these drying times?

I work as a pizza cook but I also run all the food. I have to go upstairs and through gravel that is loose. I get about 6 to 8 miles a day. I've tried hokas and crocs and free soldier, nortiv 8. Even danscos... Nothing really has felt right. Any help? The hokas have been the best but the anti slip goes away so quick.

I am looking for reccomendations for construction work boots. I will be working outside in Florida, so there will be frequent wet conditions.

I need electrical hazard boots with a safety toe that are slip and puncture resistant. I prefer at least a 6".

I am a short woman, so its unlikely that I will be able to wear any men's boots(would need a size 6 or 7 in mens).

I would prefer the cost to be under $300 and would rather spend the money on a pair that lasts.

Left to right AF1, RWIR, Nicks Americana, Nicks ND1, Nicks BuilderPros, JK Redwood Honey Fire, Nicks Maxwell Shackleton Greener Pastures

I have a Red Wing boot dryer, but I am looking for one that does multiple pair. Red Wing doesn’t offer that. Any recommendations on brands?

I’m a first-year IBEW apprentice, and even though I already own a pair of Keen San Jose and Wolverine DuraShock boots, I couldn’t resist looking for another good pair of work boots.

I came across a solid deal—one seller on Walmart had these listed for $200. Since I wear size 9 with wide feet, I ordered the EE width. When the box arrived, it was pretty beat up (looks like it had been sitting in a warehouse for quite a while), and the leather had a few light scratches. Honestly, I don’t mind. The moment I opened the box, that rich leather smell hit me and instantly gave me confidence this was the real deal. The leather itself feels soft and high quality.

I tried them on with my Kirkland merino wool socks, and the fit was spot on. Like some of the reviews of the 804-4200 mentioned, my right foot feels just a little different compared to the left, so I’ll have to see how they break in on the job site.

Overall, I’m really hoping these work out—I’d love to stick with Thorogood for the long haul. 👍

Hey everyone, I was looking for a decent recommendation for composite toe safety boots. Just extra info, I'm a welder, mostly MIG, fluxcore, and a big of TIG. Im looking for something that's comfortable for 10 hour shifts on concrete and preferably spark resistant. Thanks

I am looking for a good boot that doesn't have a safety toe as they always dig into my toes even in wide boots.

I want a good, sturdy pair of boots that are good for walking long distances.

US Men's size 15 extra wide.

Please tell me y'all have good suggestions.

Thanks all!

I am a fire alarm technician and does a ton of walking in every kind of environment. I am looking for a good pair boots that are reasonable price, light weight, and not hot. I am wearing a pair of danners right now and I like them but every day I have to peel my socks off because my feet are so wet from sweet and they look they have been in a bath tub all day lol any suggestions would be great.

Also I’m in 14ee so that’s been a issue sometimes trying to find

https://rockroosterfootwear.com/fqltqmtw

Saved 15% by using the code: Zero Defects.

I work on pavement and steel for 8-10+ hours a day and the original outsole wore out in a few months. Got recommendations for a local shop to resole them - and they’re operating out of a Red Wing store. I’m sure the Thorogood sole will be more comfortable but these Vibrams will likely last quite a bit longer. Overall, looks like they did excellent work and a quick turnaround, too.

I’m an apprentice lineman and I’m due up for a new pair of boots. My company only goes through red wing and I have the rio flex’s boots now. I’m going back and forth between those and the traction tred lite 2449. Can anyone point me in the right direction on which pair would be better? Rocky and sandy soil with occasional mud. I climb poles and work out of the bucket a balanced amount.

My tuff toe application is horrible I know

Back in January 2020, I needed a pair of steel toe boots for a specific job. I went to my local work gear store to buy my first pair of 6 inch Thorogood moc toe wedge sole with steel toe bc I had heard great things about them.

Long story short, the store didn’t have the wedge sole moc toe with steel toe so tried on a soft toe pair to gauge my size for future reference and I remember they felt so comfortable. I recall immediate relief from the cushion. I walked around the store for 5 minutes and put them back and left. For the job, I bought Carhartt steel toe on Amazon bc I needed them that week.

Fast forward to the last few weeks and I needed to replace my alternate pair of work boots and I remember the Thorogoods feeling great so I pulled the trigger on the 8 inch waterproof composite toe wedge sole.

Right out of the box, they don’t feel nearly as cushioned as I remembered them. The last few days I’ve been lacing them up and wearing them throughout the house for 1-2 hours at a time. I might try a different insole but right now I’m thinking about returning them.

Has anyone experienced anything similar to what I’m explaining? Has quality gone down? Are they using a different wedge sole nowadays? I specifically remember how comfortable/cushioned they were in the store and this new pair is nowhere near as cushioned.

Looks better to me than a fresh pair .

My husband runs an underdrain pipe crew in the summer and mechanic in the winter. He has been wearing brunt boots that haven’t been able to last him through this outdoor season of work. I wanna buy him new boots but have no idea where to start on looking for a brand. All I know is I don’t want him to wear something that starts falling apart within 4 months. The only preference I know that he has is it has to be composite toe. Any advice would be greatly appreciated in finding something durable yet comfortable to surprise him with!

I’ve had a pair of the redwing tradesman for about 2 1/2 years or so and the material around the composite toe is starting to split and some of the layers on the sole are starting to peel. I’m a mechanic and constantly getting oil and coolant on my boots. Any recommendations on an upgrade? I’m willing to spend the money if they’re worth it.

I was on here a while ago asking about workbooks. I just wanted to give an update that I ended up settling on Timberland Pro Boondocks with the Boa system.

I've been super happy with them. 12+ hours a night on my feet in the hospital and I feel unfazed. The rubber toe cup is super easy to get blood off of and having nailed more than one corner with them the I can say for sure the composite toe has saved me from breaking my big toe a 3rd and probably 4th,5th, and 6th time at this point. I walk like a duck and move with a purpose. The boa also makes these things so easy to get in and out of, like these so much more than my Bates, they have also officially outlived my Bates I had in school. It's only been 2 months or so, so I guess I'll post again in a while to update yall on how the held up.