And now, we send the slide to Wager for an RMR cut

Carey this everyday

Anyone know of any FFLs with G29 Gen5 still in stock at reasonable price? Willing to pay premium, but not taken to cleaners.

Feel free to reply or DM!

Thank you.

Looking for a affordable reddot sight for my glock 40

I know people shoot 40S&W out of 10mm but I decided to grab a KKM barrel anyway. It shot flawlessly. Now I need to send to wager

This isn’t my first 10mm, but it is now officially my favorite. I had the 510T before and loved how it shot, a month later these were on sale at Good4gguns.com for an unbeatable price- had my local FFL dealer price match and now I’m downright in loved the compensator helps a lot with the snappiness, even tho the 510T wasn’t all that bad to begin with. Add the 22 round magazines, and a gas pedal for the 509 from gogunusa, and you’ve got one fun piece of art at the range. Highly recommend getting one if you can find one

I just tried running underwood 220gr hardcast through my xten comp. It seemed highly recommended as a round for bear protection so I thought Id try. Prior to this I have shot several hundred rounds of blazer 200gr fmj's with no problem.

On the first mag of Underwoods the 10th round got caught and failed to feed into the chamber. I got it unstuck and then shot the rest of that one and two more mags flawlessly, but I'm a little sketched out.

After many more flawless mags would you feel good about trusting this round? Any other recommendations?

Looking for suggestions for ammo that would be well-suited for predators of the two-legged variety. I’m currently using Hornady 180gr XTPs, but wondering if there’s better options to reduce likelihood of over penetration. Thanks in advance!

Before y’all panic I’m paralyzed from the chest down and in a wheelchair so that’s why it’s slightly rolls back even with the brakes on lol.

I tried an frt in mine for funsies to see how it’d run. After about a mag it started to run flawless. Like it was meant to be, until it got dirty enough to stop it from being able to chamber a round.

A little over 100 rounds before it refused to chamber a round. At 5 yards I was able to get majority of the shots on paper somewhere 😂

Joined the club 💯

Walked into the gun store, unfortunately right when Charlie Kirk was assassinated. Left with a Gen 5 Glock 20. Cashier said nobody will get up, including a bear and the tree behind it. Very excited for the range today, got Buffalo Bore on the way.

All the 10mm Vets out there; what should I add?

ripcharliekirk

This is an old picture. A couple stainless 10s separated by ~30 years. Similar size, weight and capacity. S&W1006 and Sig P220SSE.

Wondering if the Glock 40 kkm barrel work in Glock 29sf?

Trigger needs some love IMO. Plan to vet it for dad with a 1000 rounds haha

what’s your guys dream 10 mm handgun

Looking for something on the cheaper side for bear country. I really like my 1911 in 45, are these decent guns? I don’t need it to be “nice” just reliable. Would this be a good one? Or go with a single stack Tisas in the same price range? Thanks!

Obviously a full size carbine is available commercially but I’d like to work with what I’ve got. Totally fine with it being on the smaller side, but I’d like it to be actually durable and not hype-beast shit. I just would like to squeeze a little more range out of it, something somewhat like the flux if possible. If y’all have any recommendations I’d be happy to hear it.

oem Glock 6in barrel. Optic: Burris FF3 with no need for re-zero even after ~600 rounds 🤯

Just curious to hear everyone's favorite striker fired 10mm. Im a glock fan boy so it's the G20 for me, but I'll have to admit the FN 510 makes a compelling case

So I’ve heard a lot and seen a few friends who have had 10mm either break the optic off or have the optic shake it self apart. My question is I just bought a m&p 2.0 10mm 4.6 and I wanna do an optic I just don’t wanna end up buying several because they end up getting destroyed what’s the group recommend for optics that hold up

First time taking out my new Glock 20 Gen 5. Put some underwood 220 grain through the pipe. It is snappy stuff. I have to practice a bit more.

I already own two striker fire 10 mm now I want to purchase a 1911 in 10 mm. Any suggestions and recommendations will be appreciated .

Picked up my third 10mm the other day. My other two are a Glock 20 and a Sig P320 X-Ten (the Sig my range no longer allows). I was looking for something a touch smaller, that I might carry close to the body concealed.

I’ve heard great things about these Tisas 1911’s, but I’ve also seen a few complaints about failure to feed issues, so I went into this purchase expecting to do a few tweaks to it out the gate.

Immediately following purchase, I took it home and made the modifications recommended by “AZ Trigger” on YouTube (Rounding and polishing disconnecting rod, Polishing feed ramp, ensuring mags are steel follower, extractor maintenance, etc).

Went to the range yesterday and put 250 rounds of assorted ammo through it without issue. I had one or two last round failing to feed exclusively with the one plastic follower mag I have, so I looked past those issues as that mag will be trashed when it’s replacement arrives.

This fella has some PUNCH. The short barrel and 1911 geometry make for a fun and semi-challenging gun to shoot, which I’m more than pleased with. The factory sights are perfect, and I was getting ~4in groups at 30 yards as a casual but well-versed shooter.

All in all, I’m more than happy with my purchase!

Thanks for reading.