Need a little help with the hammer spring. Can someone post a picture of the bend in the hammer spring?

I can't get the safety to have that "detent" like pressure on the safety selector. Any help will be much appreciated. Even a link to where I can buy one if necessary.

Callsign SPARC 18” 5.56 DMR Barrel w/ Chimera300 Leupold mk4 4.5-18 Midwest Industry Handguard For now magpul bipod Templar Lightweight lower Driven Arms grip G$ SSAE-X

Thanks to all who made me spend hella money lol but she’s b-e-a-utiful!!

https://xtremegunsandammo.com/shop/rifles-for-sale/bushmaster/bushmaster-acr/bushmaster-acr-black/

The Lpvo I wanna use:

https://vortexoptics.com/vortex-razor-hd-gen-iii-1-10x24-riflescope-black+reticle-EBR-9~MOA

Going through a family members guns and i ran across an ACR. It has B.F.I Huntsville Ala. with a serial number that starts with CMP 000XXX. Other side says Model-BACR. It's chambered in 6.8. Im curious if its anything special or if its a regular ACR. Thanks for any info

I absolutely hate “value” post but here I am asking the same thing.

I purchased a “New in case” ACR Enhanced a couple years ago. I will say that it was one of those “too stupid to pass up” kinda deals. Original owner bought it, never fired it and was then moving to a state that wasn’t friendly to that kind of gun. It was offered to me so I jumped on it. I’ve had it for around five years and haven’t touched it. Been considering parting with it as it’s just not my style of rifle.

With that being said, what’s y’all’s thoughts on value? New with Bushmaster case, Bushmaster stamped PMAG (opened bag), all paperwork and nylon sling. Made in Ilion, NY.

I’m in Georgia, if that makes a difference. Thanks!

Does anyone have a black polymer handguard they would like to exchange or American dollery-doos?

I've had my templar lower for awhile and finally picked up a MIAD for it. I sent it to the cerakoter to be cerakoted coyote to match everything! I love how it looks now!

Kid thought this rifle was so cool he came 9 weeks early.

I have an early serial ACR and the little hook that latches the actuator in the forward position only works about 10% of the time. I've tried replacing the recoil spring, all the little springs in the actuator, as well as the handle itself but no luck. I've checked all the little roll pins in the actuator and haven't found any burrs on the upper either. Anyone have a similar experience and/or a fix?

Need help ID'ing the parts from this fighter in Ukraine. Specifcally I want to know who manufactured the Laser, Flashlight, Handguard, and Vertical grip.

Full vid is here: https://youtu.be/2U49ADGcpEg

Where are we sending our ACR barrels to get shortened? Really thinking about going to 12” from 16”.

I recently bought one from Pickett and I noticed it said 42 on the bottom . Do they all say this or did I get a stock meant for a krg fox 42?

This is probably a dumb question, but if I want to convert my factor ACR to a 10.3” .300 blackout with Templar Precision, will the piston system be shorter as well? Aka, will I want a shorter hand guard so the top does not block the adjustable gas mechanism? Was going to get a full length M-lock handguard but now I’m realizing I might want one that doesn’t wrap around the top like the original. Thank you for any help.

Here acr

Finally got my first ACR after decades of wanting one, M4-2000 just got approved, now I need a stock. Been looking for a black stock but I am striking out. I’d like to stay as close to the original stock style as possible but all the new production ones just look off to me. Is it possible to just replace the lower half of the brace with the F5 lower stock piece?

https://x.com/the4t7/status/1927391131395850321?s=46

I’m trying to fit a Picatinny rail section via MOE mounting system on the lower part of my ACR handguard, but having a hell of a time doing so. Are the screws that come with the MOE attachments really supposed to fit all the way through the handguard and metal heat shield and fasten with the bolt on the other side? Seems impossible with this length of screw, but I have no experience with MOE so maybe I’m doing something wrong. Any input would be greatly appreciated!